Congratulations!Waste oil distillation machine running well in Lebanon

Home  →  NEWS   →   Company news   →   Congratulations!Waste oil distillation machine running well in Lebanon

waste oil distillation machine

Congratulations!Waste oil distillation machine running well in Lebanon

In the April of 2014, Lebanon customer bought one set waste oil distillation machine and one tyre pyrolysis plant.He plan to use distillation machine refining tyre oil. After the machine arrived customer place, we sent one of our engineer to his place guide installation the waste oil distillation machine. Installation time is about 30 days.
Waste oil distillation machine is mainly refining waste engine oil,motor oil,tyre oil,plastic and so on to clean diesel. The oil recovery yield is around 85%. End energy-diesel fuel can be directly using in tractors,trucks, diesel oil generators etc.
Now the machine is ruuning very well in his place, you can click here to see the machine running vedio.

Previous
Waste tyre recycling pyrolysis plant suppliers in China
Next
Tire Oil & Diesel oil SGS report

DOING Group supplier of plastic to oil plant

Home  →  NEWS   →   Company news   →   DOING Group supplier of plastic to oil plant

DOING Group supplier of plastic to oil plant

Company news
For hundreds of years since the booming of industrial revolution, pollution kept growing faster and faster, until today it is threatening people’s life from every aspect. Dear readers must remember the horrible event of the Big Smoke in London on December 5th 1952, when the poisonous smog heavily covered the whole city and killed 4000 people only in 4 days. The direct killer was sulfur dioxide and dust burned from coal, and the indirect reason was the accumulation of atmospheric pollutants caused by inversion layer.
Pollution is like a sniper, he is ambushing in somewhere without big motion, yet when time comes, harms people fatally. Although it happened in last century, various pollution lurks in human’s life, which definitely cannot be ignored. Actually it is becoming a key concern of many governments and environmentalists all over the world. In order to avoid the disaster as in London or minimart disease in Japan, leadership in many countries is searching optimum methods to protect the environment while developing economy rapidly. From landfill, burning to sorting treatment, governors have been hunting for a way to deal with the daily garbage as well as make full use of them, however, all the previous solutions cannot really solve it.

Plastic to oil

Henan DOING Mechanical Equipment Co. Ltd noticed this situation and is devoted herself to transforming household garbage like Plastic to oil. After conquering hundreds of difficulties and failures during last 20 years, finally DOING Think Tank worked out a way to recycle domestic waste such as scrap plastic in a renewable method. DOING technology is capable of turning those waste substances into valuable fuel oil and other useful and salable by products with wide markets. When this creation was published, it drew large attention of governmental projectors, environmentalists, and investors from many countries out of China.

Plastic oil

Turning daily garbage into green wealth with least pollution is no longer a legend, DOING Plastic to oil pyrolysis plant, Waste Engine/Motor Oil to Diesel Oil has made it come true. The machines are qualified with SGS, BV, CE and ISO, when you come to our site you will definitely not be disappointed, the real machines surprise you more.

Previous
Global Energy Chemicals and Oil Market from waste plastic - Recovery & Technologies - 2014 - 2020

Waste engine oil distillation machine

Pyrolysis recycling plant products
DOING Distillation technology:
Waste engine oil distillation machine, is also called oil refinery technology. It can refining waste oil(waste engine oil,motor oil, tyre oil, plastic oil etc) to clean diesel. The oil recovery yield is about 85% ( according to oil quality).

waste oil distillation machine

Waste oil distillation machine working process:
Feed liquid waste oil - heating - catalytic cracking - cracking - fractionation - cooling liquid- decompression - flammable gas recovery - flammable gas combustion -desulfurization
Waste oil distillation machine technical data:

Items	Contents
Raw material	Tyre oil, Plastic oil, Raw oil, waste engine oil, waste motor oil
Structure form	Vertical (easy maintenence,easy slugging)
Model	DY-DP
24-hour capacity	5t-100t…
Operating pressure	Constant pressure
Heating material	Coal, charcoal, fuel gas, fuel oil
oil out-put oil rate	Around 85% (Depend on the material)
Material of reactor	Q345R boiler plate
Thickness of reactor	16mm
Reactor rotate speed	0.4-0.8 turn/minute
Mode of cooling	Water cooling
Power in total	4.0-8.0kw

Diesel oil Application:
Diesel oil can be directly used to tractors,trucks,diesel oil generators etc.

Diesel oil application

You can click here to see the vedio to check waste oil distillation machine running situation.
After-sale Service:
1.Design the installation drawings according to your site
2.For each set of waste oil distillation machine, one engineer will be sent to guide your installation, test the machine and train your workers.
3.1 year warranty, engineers available to service at any time
4.Periodical call visit, to make sure there is no problem of the equipment
5.Design specific maintenance program according to different situation of your plant
Henan DOING Mechanical Equipment CO., Ltd is a professional manufacturer and supplier of waste oil distillation machine with advanced distillation technology. Our plant can ensure you high oil yield and safety; you will get great profit from this project. Welcome your inquiry and visiting.

• Waste engine oil distillation machine demonstration animation
• Waste engine oil distillation machine related videos

Prev Λ High Tech waste tyre to oil pyrolysis plant

6/8/10T capacity waste plastic pyrolysis to oil plant

Products / Pyrolysis Plant

DOING factory manufacture many different modes of waste plastic pyrolysis to oil plant to meet pyrolysis machine buyer needs

• Features
• Technical Data
• Application

Waste plastic pyrolysis to oil plant

DY-6T capacity waste plastic pyrolysis to oil plant (D2200mm*L6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.

DY-8T capacity waste plastic pyrolysis to oil plant (D2200mm*L6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts Q245R steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material Q245R, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.

DY-10T capacity waste plastic pyrolysis to oil plant (D2600mm*L6600mm)
1. Working with Auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 Celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by DOING waste plastic pyrolysis to oil plant as an example:

Model	Feeding	Processing	Cooling	Discharge	Total
2200*6000	1.5hr	7-8hr	1.5hr	1.5hr	12hr
2200*6600	1.5hr	8hr	1.5-2hr	1.5hr	14hr
2600*6600	2 hr	10 hr	2-3 hr	2-3 hr	16-18 hr

Fuel oil usage

•  
• Next：High oil rate waste plastic pyrolysis oil plant

Pyrolysis technology support

HOME > FAQ > Waste oil distillation >

How to convert waste motor oil to diesel oil?

Waste oil distillation common problems

With a uncertain price of crude oil and high cost of fuel, many new technologies are emerging that provide consumers alternatives to simply pulling up to the nearest gas pump and filling up. As an added benefit, these new fuel alternatives are cleaner burning and less harmful to the environment than regular gasoline and diesel. Converting used regular motor oil to diesel, which can be used in any diesel burning vehicle or generator, is becoming more popular, not only for its relative simplicity but also due to the abundance and minimal cost of obtaining used oils. Most small garages keep discarded oil in huge containers that they pay to have removed. This helps keep the overall cost of the ready-to-use fuel.

convert waste oil to diesel oil

Convert waste motor oil to diesel oil by distillation machine:

1 Gather used automotive oil and places it into an approved container. Many auto mechanics are willing to give away old customer oil stored in the shop that is headed for the recycling plant.
2 Transfer the oil into an industrial vat and heat it up to 140 degrees. This will decrease the viscosity of the oil and allow for proper filtering.
3 Strain the oil using a fuel filter to remove any particles or impurities and transfer the clean oil to a new container.
4 Add some additives into filtered oil. This will cause the glycerin contained within the oil to separate, forming a distinct layer.
5 Remove the excess glycerin and allow the diesel fuel to cool until reaching room temperature before handling.
6 Test your new fuel. Pour a quart of the finished product into a clear container and add a similar amount of water. Check to make sure a distinct boundary layer appears, separating the fuel and water.

Finished Diesel oil can used directly to tractors, trucks, power generator, ships etc.

Diesel oil usage

  PREV:  Why Choose DOING waste tire recycling pyrolysis plant?

What is diesel application extracte from waste oil?

Pyrolysis Plant FAQ /Technology

What is diesel application extracted from waste oil?

FAQ of pyrolysis plant

The waste oil refinery machine is to convert waste oil mainly waste motor oil, waste engine oil, waste plastic oil, waste tyre oil, heavy oil to diesel. waste tire/plastic oil is extracted from waste tyre/plastic by our waste pyrolysis plant,the oil is also called pyrolysis oil.We Xinxiang Doing Renewable Energy Equipment Co., Ltd, as leading supplier&manufacturer successfully increased oil yield rate to 95% of waste engine oil,we doing have complete set production line,we have exported our machine to more than 60 countries in the world.

waste oil to diesel
After refined we can get high standard diesel oil from waste oil. The diesel can be used in tractor, truck, ship, and boiler etc, the diesel quality can reach a high standard, you can sell diesel directly to make profit.

diesel extracted from waste oil application

Previous
what is the component of tyre pyrolysis plant?Next
What is pyrolysis oil(tyre oil,plastic oil,rubber oil,) main application?

Pyrolysis Plant Hot Sale

• waste tyre pyrolysis plant
• waste plastic to oil machine
• Waste oil distillation machine
• Tire oil to diesel refining machine
• Waste tire recycling plant
• Waste plastic recycling to fuel oil plant
• waste plastic disposal machine

Waste plastic to oil machine working process?

• FAQ of Pyrolysis Plant

Waste plastic to oil machine working process:

Waste plastic to oil machine

1. Loading waste plastic is so different with the loading waste tires. Loading tires 10 tons one time can fully inside the reactor. But loading waste plastic is continuous, as the plastic melt so fast so we need load 4-5 times to load the reactor then can load fully for 12 tons. Loading while the reactor working. If the plastic is wet, then it can finish loading needs 7 hours, if the plastic is not wet, then it needs 4 hours to finish loading. Why, because if the plastic is wet,when pyrolysis first the water become water vapor to come out then plastic begin to melt. That is why wet plastic need longer times. So the reactor first time like the dryer first dry the plastic then pyrolysis. Hope you understand this point.
2. After loading fully, if the plastic is not wet, after 6-8 hours the plastic oil gas come out, then the oil gas coming out will last 18-20 hours. That is mean after 18-20 hours the oil gas ran out.
During the heating period, the oil gas temperature(there is an thermal couple to test the oil gas temperature) need to control 270-300 Celsius degree, which is the best temperature. But if the lower temperature(lower than 270) u control the oil quality will be better,but it needs longer times(longer than 18-20 hours). If u did not required high oil quality then u can use the high temperature (higher than 300) this will be fast( shorter than 18-20 hours).
3. At same time,there are some gas(CH4, C2H6, C3H8, C4H10 and H2) can not be cooled under normal pressure,they will be recycled back to combustion system to burn as energy.
4. After the oil gas running out then 2 hours cooling we can discharging the carbon black.
5. after this then you can begin the next batch, no need to wait for the reactor become cool as we use machine loading the waste plastic.

• Previous：What energy is used to heat the pyrolysis reactor?